у12-1Enquiry|Print this page
| Category | Type | Steel grade | Country |
|---|---|---|---|
| Grades | Special Alloy | у12-1 | Russia |
Chemical composition%of the ladle analysis of gradeу12-1
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Cu(%) |
|---|---|---|---|---|---|---|---|
| 1.15-1.24 | 0.17-0.33 | 0.17-0.33 | ≤0.030 | ≤0.028 | ≤0.028 | ≤0.25 | 0.25 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 666(≥) | 388(≥) | 31 | 11 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 333 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 982(≥) | 112(≥) | 22 | 22 | 13 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 412 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 454 | 176 | 228 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 1.4923 | Russia | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 | |
| X 22 CrMoV 12-1 | Russia | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 | |
| X22CrMoV12-1 | Russia | Creep resisting steels, nickel and cobalt alloys | |
| 1.4923 | Russia | Creep resisting steels, nickel and cobalt alloys | |
| X155CrVMo12-1 | Russia | Tool Steels; Technical Conditions of Delivery | |
| 32CrMoV12-10 | Russia | ||
| 32CrMoV12-10 | Russia | ||
| 32CrMoV12-10 / 32CDV12 | Russia | ||
| 1.7765 | Russia | ||
| 1.4923 | Russia | Creep resisting steels, nickel and cobalt alloys | |
| 1.4926 | Russia | Steels for larger forgings for components in turbine and generator installations | |
| X21CrMoV12-1 | Russia | Steels for larger forgings for components in turbine and generator installations | |
| X22CrMoV12-1, 1.4923 | Russia | Creep resisting steels, nickel and cobalt alloys |
Relevant products
у12-1 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |