ISO ISO X12CrNiMoV12 3Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | ISO X12CrNiMoV12 3 | ISO | ISO |
Chemical composition%of the ladle analysis of gradeISO X12CrNiMoV12 3
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) | N(%) | B(%) |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.08-0.15 | Max 0.35 | 0.50-0.90 | Max 0.03 | Max 0.025 | 11.0-12.5 | 1.00-2.00 | 1.50-2.00 | 0.25-0.40 | 0.02-0.04 | Max 0.008 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 622(≥) | 294(≥) | 13 | 11 | 43 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 123 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 863(≥) | 156(≥) | 24 | 42 | 41 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 144 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 793 | 746 | 694 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X12CrNiMoV12-3 | ISO | ISO | Creep resisting steels, nickel and cobalt alloys |
| 1.4938 | ISO | ISO | Creep resisting steels, nickel and cobalt alloys |
| Z12CNDV12 Air 9160/C | ISO | ISO | wrought steels used in aeronautical constructions |
| X12CrNiMoV12-3, 1.4938 | ISO | ISO | X12CrNiMoV12-3, 1.4938 |