Location » Home » Grades > Stainless Steels > X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2

EN X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Details

X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Application:Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, used in the chemical, petrochemical, pharmaceutical, machine industries (hydraulic systems) and food industry for valves, flanges, pump parts, springs, heat

Category Type Grade Microstructure Designations
Grades Stainless Steels X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 Austenite European - EN , EN 10088-1 - Stainless steels - Part 1: List of stainless steels
EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10263-5 - Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Chemical composition(wt.%) of X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 grade: EN 10088-1

Elements Min.(≥) Max.(≤) Similar Remarks
C - 0.04
Si - 1.00
Mn - 2.00
P - 0.045
S - 0.015
Cr 17.00 19.00
Ni 8.50 10.50
Mo - -
N - 0.11
Cu 3.00 4.00

Mechanical properties of grade X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 EN 10088-1

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note
175

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note
450 650

Impact,Kv/Ku(J)

Condition Min Max Similar Note

Elongation,A(%)

Condition Min Max Similar Note
45

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
HB 215

Physical properties of grade X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 EN 10088-1

Density Note
7.9 g/cm3
Linear expansion coefficient Note
16.7 *10-6m/(m*K)
Thermal conductivity Note
15 W/(m*K)
Specific heat capacity Note
500 J/(kg*K)
Young Note
200 GPa
Linear expansion coefficient Note
Temperature range: 20-100 °C - 16,7 *10-6m/(m*K)

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, used in the chemical, petrochemical, pharmaceutical, machine industries (hydraulic systems) and food industry for valves, flanges, pump parts, springs, heat exchangers, screws and even chains.Austenitic non-magnetic stainless steel with high strength properties - a significant resistance to impact, abrasion and high hardness.The grade can be used for working at elevated temperatures

X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 - Form of Supply

Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X3CrNiCu18-9-4 B.S. UK
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
1.4567 B.S. UK
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
X3CrNiCu18-9-4 ISO International
Stainless steels - Chemical composition
X3CrNiCu18-9-4, 1.4567, 1.4560, X3CrNiCu19-9-2 EN European
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties, used in the chemical, petrochemical, pharmaceutical, machine industries (hydraulic systems) and food industry for valves, flanges, pump parts, springs, heat
X3CrNiCu19-9-2 B.S. UK
Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
1.4560 B.S. UK
Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels

Enquiry