1.4104, X14CrMoS17, AISI 430F Enquiry | Print this page
EN 1.4104, X14CrMoS17, AISI 430F Details
EN 1.4104, X14CrMoS17, AISI 430F Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | 1.4104, X14CrMoS17, AISI 430F | Ferrite | European - EN , EN 10088-1 - Stainless steels - Part 1: List of stainless steels EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 1.50 | ||
| Mn | - | 1.50 | ||
| P | - | 0.04 | ||
| S | 0.15 | 0.35 | ||
| Cr | 16.00 | 18.00 | ||
| Ni | - | - | ||
| Mo | 0.20 | 0.60 |
Mechanical properties of grade 1.4104, X14CrMoS17, AISI 430F EN 10088-1
Yield Strength,Rp 0.2(MPa)
| Condition | Min | Max | Similar | Note |
|---|---|---|---|---|
| +QT 650 | 580 |
Tensile Strength,Rm(MPa)
| Condition | Min | Max | Similar | Note |
|---|---|---|---|---|
| smooth bars +A | 880 | Dimensions <16mm | ||
| smooth bars +A | 800 | 16-40mm | ||
| +QT 650 | 700 | 980 |
Impact,Kv/Ku(J)
| Condition | Min | Max | Similar | Note |
|---|
Elongation,A(%)
| Condition | Min | Max | Similar | Note |
|---|
Reduction of area,(%)
| Condition | Min | Max | Similar | Note |
|---|
Hardness
| Condition | Type | Min | Max | Similar | Note |
|---|---|---|---|---|---|
| smooth bars +A | HB | 280 | Dimensions <16mm | ||
| smooth bars +A | 250 | 16-40mm | |||
| smooth bars +A | 230 | Dimensions 40-63mm |
Physical properties of grade 1.4104, X14CrMoS17, AISI 430F EN 10088-1
| Modulus of elasticity, E | Note |
|---|---|
| 215 GPa | |
| Thermal conductivity, λ | Note |
| 25 W * m-1 * K-1 | |
| Thermal capacity, cp | Note |
| 460 J * kg-1 * K-1 | |
| Linear expansion coefficient, α | Note |
| 10 * 10-6 K-1 | |
| Specific resistance, Ω | Note |
| 0.7 mkOhm * m |
for drawn and peeled bars
Delivery condition +A
Tensile strength, Rm: 430 - 630 N/mm2
Yield strength, Rp0,2: >250N/mm2
Elongation, A: >20%
Tensile strength, Rm: 430 - 730 N/mm2
Yield strength, Rp0,2: >250 N/mm2
Elongation, A: >12%
Tensile strength, Rm: 500 - 780 N/mm2
Yield strength, Rp0,2: >310 N/mm2
Elongation, A: >7%
Tensile strength, Rm: 530 - 780 N/mm2
Yield strength, Rp0,2: >330 N/mm2
Elongation, A: >7%
Dimensions<10mm
Dimensions 10-16mm
Dimensions 16-63mm
Dimensions >63mm
- for drawn wires +A
Delivery condition +A
Tensile strength, Rm:<700 N/mm2
Elongation, A: >20%
Tensile strength, Rm:<750 N/mm2
Elongation, A: >15%
Tensile strength, Rm:<800 N/mm2
Elongation, A: >15%
Tensile strength, Rm:<850N/mm2
Elongation, A: >15%
Tensile strength, Rm:<900N/mm2
Elongation, A: >10%
Tensile strength, Rm:<950N/mm2
Elongation, A: >10%
Dimensions 0.05 - 0.10mm
Section 0.1 - 0.2mm
Section 0.2 - 1.0mm
Section 1.0 - 3.0mm
Section 3.0 - 5.0mm
Section >5.0mm
- for hardened drawn wires
Sections >0.05mm
+C500 - Rm: 500 - 700N/mm2
+C600 - Rm: 600 - 800 N/mm2
+C700 - Rm: 700 - 900 N/mm2
+C800 - Rm: 800 - 1000 N/mm2
+C900 - Rm: 900 - 1100 N/mm2
- other mechanical properties
Modulus of elasticity, E: 215 GPa
Thermal conductivity, λ: 25 W * m-1 * K-1
Thermal capacity, cp: 460 J * kg-1 * K-1
Linear expansion coefficient, α: 10 * 10-6 K-1
Specific resistance, Ω: 0.7 mkOhm * m
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X6CrMoS17 | AWS | Germany | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4105 | AWS | Germany | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| X6CrMoS17 | B.S. | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4105 | B.S. | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4104, X14CrMoS17, AISI 430F | EN | European | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| A 314 S43020 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 S43020 | SAE | USA | Stainless Steel Forgings |
| A 581 S43020 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S43020 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S43020 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| F738 Class F1-45 S43020 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class F1-60 S43020 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class F1-45 S43020 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S43020 | AISI | USA | Ferritic Chromium Free-Machining Stainless Steel |
| A 314 S43023 | SAE | USA | Stainless Steel Billets and Bars for Forging |