EN 9ΧΦΜEnquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | 9ΧΦΜ | EN | Russia |
Chemical composition%of the ladle analysis of grade9ΧΦΜ
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
0.80-0.90 | 0.15-0.35 | 0.30-0.60 | ≤0.030 | ≤0.030 | 0.40-0.70 | ≤0.35 | 0.15-0.25 | 0.15-0.30 | ≤0.20 | ≤0.30 | ≤0.03 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
543(≥) | 875(≥) | 31 | 12 | 42 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 422 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
258(≥) | 795(≥) | 22 | 23 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 341 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
241 | 439 | 531 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
Y1Cr18Ni9 | EN | Russia | Improve the machinability, ablation resistance. Suitable for automatic lathe production of bolt and nut |
1Cr18Ni9 | EN | Russia | High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. Used in architectural decoration parts |
Y1Cr18Ni9Se | EN | Russia | Improve the machinability, ablation resistance. Suitable for automatic lathe production of rivets, screws |
0Cr18Ni9 | EN | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr19Ni10 | EN | Russia | Carbon content lower than 0Cr19ni9 steel, excellent intergranular corrosion resistance, is used for welding after the class is not processed parts |
0Cr19Ni9N | EN | Russia | Based on 0cr19ni9 plus N, strength increase and the plastic is not down. Reduce the thickness of the material. As a structure with strength components |
0Cr19Ni10NbN | EN | Russia | Based on zero cr19ni9 plus N and Nb, with better than 0 cr19ni9 properties and USES |
F10009 | EN | Russia | Used in the products of the automobile, truck, tractor, and allied industries |
0Cr19Ni13Mo3 | EN | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr19Ni13Mo3 | EN | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
1Cr18Ni9Ti | EN | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
0Cr18Ni9Cu3 | EN | Russia | Stainless steel bars |
1Cr13Mn9Ni4 | EN | Russia | 1Cr13Mn9Ni4 |
9Cr18 | EN | Russia | Stainless steel bars |
9Cr18Mo | EN | Russia | Stainless steel bars |
9Cr18MoV | EN | Russia | Stainless steel bars |
5Cr21Mn9Ni4N | EN | Russia | Heat-resisting steel bars |
3Cr18Mn12Si2N | EN | Russia | Heat-resisting steel bars |
2Cr20Mn9Ni2Si2N | EN | Russia | Heat-resisting steel bars |
1Cr19A13 | EN | Russia | Heat-resisting steel sheets and plates |
Relevant products
1.4980 Round Bar
1.4980
95CrV / 9CrV strip steel
GH3039 round bar
K93600\1.3912\Invar36\4J36 rod coil strip wire
06Cr19Ni10/S30408/304/S30400/1.4301 Tube
S30409/304H/S30409/1.4948 Tube
S32169/321H/S32109/1-4940 Tube
X19CrMoVNbN11-1 / 1.4913 Disc Forging
1.4923 / X22CrMoV12-1 Round Bar
G-X2CrNiMnMoNNb21-16-5-3 non-magnetic steel
1.4980/A286/660/1.2779
Steel of Turbine blade B50A947 A4
1.4923(X22CrMoV12-1) Stainless Steel Sheets/Strip/Plate/Coil
ESR 1.4986 Round Bar
1.2779 Intermediate Liner / Hollow Bar
UNS K30960 Bright Round Bar
1.4923(X22CrMoV12-1) Hexagon socket head cap screws - DIN 912
422(UNS S42200, 616, 1.4935) Stainless Steel Bar
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
9ΧΦΜ Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry |
1.2379 ESR Round Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry |