UNS Type410Cb(XM-30)Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | Type410Cb(XM-30) | UNS | USA |
Chemical composition%of the ladle analysis of gradeType410Cb(XM-30)
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Nb(%) |
---|---|---|---|---|---|---|
0.15 | 1 | 1 | Max 0.04 | Max 0.03 | 11.5-13.5 | 0.05-0.20 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
868(≥) | 963(≥) | 43 | 43 | 42 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 221 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
642(≥) | 617(≥) | 44 | 24 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 413 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
526 | 953 | 469 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 276 S41040 | UNS | USA | Stainless Steel Bars and Shapes |
S41040 | UNS | USA | Martensitic Chromium Stainless Steel with Columbium |
A 240 S44627 | UNS | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 268 S44627 | UNS | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
A 276 S44627 | UNS | USA | Stainless Steel Bars and Shapes |
S44627 | UNS | USA | Ferritic Chromium Molybdenum Columbium Stainless Steel |
SA-240 S44627 | UNS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-268 S44627 | UNS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
A 581 S20300 | UNS | USA | Free-Machining Stainless Steel Wire and Wire Rods |
A 582 S20300 | UNS | USA | Standard Specification for Free-Machining Stainless Steel Bars |
F 837 Class A1-50 S20300 | UNS | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
F 837 Class A1-55 S20300 | UNS | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
F 837 Class A1-70 S20300 | UNS | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
F738 Class A1-50 S20300 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class A1-70 S20300 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class A1-80 S20300 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F836 Class A1-50 S20300 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
F836 Class A1-70 S20300 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
F836 Class A1-80 S20300 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
S20300 | UNS | USA | Austenitic Chromium Manganese Nickel Copper Free Machining Stainless Steel |