UNS S13800Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | S13800 | UNS | USA |
Chemical composition%of the ladle analysis of gradeS13800
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | N(%) | Al(%) |
---|---|---|---|---|---|---|---|---|---|
0.05 | 0.1 | 0.2 | Max 0.01 | Max 0.008 | 12.25-13.5 | 7.50-8.50 | 7.50-8.50 | 0.01 | 0.90-1.35 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
981(≥) | 141(≥) | 23 | 22 | 32 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 322 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
331(≥) | 794(≥) | 32 | 24 | 41 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 434 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
847 | 133 | 931 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 564 S13800 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S13800 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S13800 | UNS | USA | Age-Hardening Stainless Steel Forgings |
S13800 | UNS | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
SA-564 S13800 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 S13800 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 S13800 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
A 564 S13800 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S13800 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S13800 | UNS | USA | Age-Hardening Stainless Steel Forgings |
S13800 | UNS | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
SA-564 S13800 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 S13800 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 S13800 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
A 564 XM-13 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 Type XM-13 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 XM-13 | UNS | USA | Age-Hardening Stainless Steel Forgings |
A 959 Type XM-13 | UNS | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
F 899 Type XM-13 | UNS | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
SA-564 XM-13 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |