UNS S17400Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | S17400 | UNS | USA |
Chemical composition%of the ladle analysis of gradeS17400
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Cu(%) | Nb(%) |
|---|---|---|---|---|---|---|---|---|
| 0.07 | 1 | 1 | Max 0.04 | Max 0.03 | 15.5-17.5 | 3.00-5.00 | 3.00-5.00 | 0.15-0.45 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 835(≥) | 611(≥) | 42 | 21 | 24 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 113 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 747(≥) | 827(≥) | 31 | 43 | 31 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 412 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 751 | 386 | 655 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 1028 S17400 | UNS | USA | Stainless Steel Bars for Compressor and Turbine Airfoils |
| A 564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S17400 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S17400 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| A 982 S17400 | UNS | USA | Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
| A 988 S17400 | UNS | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| F738 Class P1-90 S17400 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class P1-90 S17400 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S17400 | UNS | USA | Precipitation Hardenable Chromium Nickel Copper Stainless Steel |
| SA-564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S17400 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S17400 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 1028 S17400 | UNS | USA | Stainless Steel Bars for Compressor and Turbine Airfoils |
| A 564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S17400 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S17400 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| A 982 S17400 | UNS | USA | Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
| A 988 S17400 | UNS | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
| F738 Class P1-90 S17400 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class P1-90 S17400 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
