UNS S17400Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | S17400 | UNS | USA |
Chemical composition%of the ladle analysis of gradeS17400
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Cu(%) | Nb(%) |
---|---|---|---|---|---|---|---|---|
0.07 | 1 | 1 | Max 0.04 | Max 0.03 | 15.5-17.5 | 3.00-5.00 | 3.00-5.00 | 0.15-0.45 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
737(≥) | 782(≥) | 41 | 31 | 32 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 443 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
775(≥) | 248(≥) | 31 | 31 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 242 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
234 | 529 | 124 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 1028 S17400 | UNS | USA | Stainless Steel Bars for Compressor and Turbine Airfoils |
A 564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S17400 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S17400 | UNS | USA | Age-Hardening Stainless Steel Forgings |
A 982 S17400 | UNS | USA | Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
A 988 S17400 | UNS | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
F738 Class P1-90 S17400 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F836 Class P1-90 S17400 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
S17400 | UNS | USA | Precipitation Hardenable Chromium Nickel Copper Stainless Steel |
SA-564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 S17400 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 S17400 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
A 1028 S17400 | UNS | USA | Stainless Steel Bars for Compressor and Turbine Airfoils |
A 564 S17400 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S17400 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S17400 | UNS | USA | Age-Hardening Stainless Steel Forgings |
A 982 S17400 | UNS | USA | Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
A 988 S17400 | UNS | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
F738 Class P1-90 S17400 | UNS | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F836 Class P1-90 S17400 | UNS | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |