UNS S45000Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | S45000 | UNS | USA |
Chemical composition%of the ladle analysis of gradeS45000
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | Cu(%) | Nb(%) |
|---|---|---|---|---|---|---|---|---|---|
| 0.05 | 1 | 1 | Max 0.03 | Max 0.03 | 14.0-16.0 | 5.0-7.0 | 0.5-1.0 | 1.25-1.75 | Min 8×C％ |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 661(≥) | 247(≥) | 13 | 33 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 243 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 198(≥) | 281(≥) | 14 | 43 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 332 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 496 | 878 | 871 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 564 S45000 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S45000 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S45000 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| S45000 | UNS | USA | Stainless Steel |
| SA-564 S45000 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S45000 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S45000 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 564 S45000 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S45000 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S45000 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| S45000 | UNS | USA | Stainless Steel |
| SA-564 S45000 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S45000 | UNS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S45000 | UNS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| A 564 XM-25 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 Type XM-25 | UNS | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 XM-25 | UNS | USA | Age-Hardening Stainless Steel Forgings |
| A 959 Type XM-25 | UNS | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| F 899 Type XM-25 | UNS | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
| SA-564 XM-25 | UNS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |