AISI CPM Rex 25Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | CPM Rex 25 | AISI | USA |
Chemical composition%of the ladle analysis of gradeCPM Rex 25
C(%) | Cr(%) | Mo(%) | V(%) | W(%) |
---|---|---|---|---|
1.80 | 4.00 | 6.50 | 5.00 | 12.50 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
737(≥) | 223(≥) | 33 | 33 | 42 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 344 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
865(≥) | 644(≥) | 41 | 14 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 331 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
384 | 152 | 225 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
0Cr25Ni20 | AISI | USA | Oxidation resistance is better than 0cr23ni13. Mostly used as heat resistant steel |
A-29 1025 | AISI | USA | General use carbon steel rod |
1025 | AISI | USA | These products have been used typically for use in fabrication of fittings, but usage is not limited to such applications. These products are not typically used for deep forming or cupping operations. |
G10250 | AISI | USA | General use carbon steel rod |
G2500 | AISI | USA | Used in the products of the automobile, truck, tractor, and allied industries; small cylinder blocks, cylinder heads, air cooled cylinders, pistons, clutch plates, oil pump bodies, transmission cases, gear boxes, clutch housings, and light-duty brake drum |
G2500a | AISI | USA | Used in the products of the automobile, truck, tractor, and allied industries |
2Cr25Ni20 | AISI | USA | Seamless stainless steel tubes for boiler and heat exchanger |
0Cr15Ni25Ti2MoA1VB | AISI | USA | Heat-resisting steel sheets and plates |
1Cr25Ni20Si2 | AISI | USA | Heat-resisting steel sheets and plates |
2Cr25N | AISI | USA | Heat-resisting steel sheets and plates |
A 167 S31254 | AISI | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A 213 S31254 | AISI | USA | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
A 240 S31254 | AISI | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S31254 | AISI | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 269 S31254 | AISI | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 270 S31254 | AISI | USA | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
A 276 S31254 | AISI | USA | Stainless Steel Bars and Shapes |
A 312 S31254 | AISI | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A 358 S31254 | AISI | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A 167 S31725 | AISI | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
Relevant products
1.4980 Round Bar
Inconel625 round bar
Incoloy825 round bar
NO8825 round bar
Inconel825 round bar
NO8020/No8031/N08367/NO8810/NO8825 Forging
Inconel 625 Bar
Air 9160C 25CD4S Round Bar
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
AISI E2512(SAE J1249) DIN 1.5681 Round bar
S32550 Stainless Steel Seamless Tube Pipe
S32750 Stainless Steel Seamless Tube Pipe
X105CrMo17 Extruded Pipe
BS 625 Strip Coil