AMS ASTM A335 GRADE P92Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | ASTM A335 GRADE P92 | AMS | USA |
Chemical composition%of the ladle analysis of gradeASTM A335 GRADE P92
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | V(%) | W(%) | N(%) | B(%) | Nb(%) | Al(%) | Ti(%) | Other(%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.07-0.13 | Max 0.50 | 0.30-0.60 | Max 0.020 | Max 0.010 | 8.50-9.50 | Max 0.40 | 0.30-0.60 | 0.15-0.25 | 1.50-2.00 | 0.03-0.07 | 0.001-0.006 | 0.04-0.09 | Max 0.02 | Max 0.01 | Zr Max 0.01 |
Seamless Ferritic Alloy Steel Pipe for High-Temperature Service
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 455(≥) | 526(≥) | 23 | 43 | 34 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 313 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 712(≥) | 569(≥) | 12 | 41 | 14 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 113 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 534 | 896 | 979 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X10CrWMoVNb9 | AMS | USA | Boiler tubes are used in heat exchange appliances in which the energy is transferred from one medium to the other. The pipes are manufactured from carbon and low-alloy steel grades which are resistant to loads under high pressure and temperatures. They ar |
