ISO ISO H14Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | ISO H14 | ISO | ISO |
Chemical composition%of the ladle analysis of gradeISO H14
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| Max 0.08 | Max 1.0 | Max 2.0 | Max 0.045 | Max 0.030 | 22.0-24.0 | 12.0-15.0 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 395(≥) | 873(≥) | 13 | 23 | 14 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 212 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 268(≥) | 457(≥) | 33 | 43 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 244 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 469 | 549 | 256 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| S14800 | ISO | ISO | Precipitation Hardenable Chromium Nickel Molybdenum Aluminum Stainless Steel |
| S14800 | ISO | ISO | Precipitation Hardenable Chromium Nickel Molybdenum Aluminum Stainless Steel |
| PH 14-8 Mo | ISO | ISO | Sheet and Strip 15Cr - 8,4Ni - 2,2Mo - 1,1Al, vac. Induct. Melted, Solution Heat Treated |
| PH 14-8 Mo | ISO | ISO | Sheet and Strip 15Cr - 8,4Ni - 2,2Mo - 1,1Al, vac. Induct. Melted, Solution Heat Treated |
| 08X20H14C2 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 20X20H14C2 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 45X14H1482M | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 03X17H14M2 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 06X20H14C2 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 12X20H14C2 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 45X14H14CB2M | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| ISO H14 | ISO | ISO | Heat-resistant steels |
| H14 | ISO | ISO | Hot-Work Tool Steel |
| H14 | ISO | ISO | Hot-Work Tool Steel |