ISO ISO NiCr15Fe7TiAlEnquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | ISO NiCr15Fe7TiAl | ISO | ISO |
Chemical composition%of the ladle analysis of gradeISO NiCr15Fe7TiAl
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | Al(%) | Other(%) |
---|---|---|---|---|---|---|---|---|---|
0.03-0.10 | Max 0.50 | Max 0.50 | Max 0.015 | Max 0.015 | 14.0-17.0 | remaining | Max 0.15 | 1.10-1.35 | Fe:5.0-9.0,Nb+Ta 0.70-1.20 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
155(≥) | 897(≥) | 14 | 32 | 31 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 444 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
349(≥) | 651(≥) | 12 | 34 | 33 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 232 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
443 | 732 | 828 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
NiCr15Fe7TiAl | ISO | ISO | Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines |
2.4669 | ISO | ISO | NiCrFeTi alloy; High-temperature resisting material |
NiCr15Fe7TiAl | ISO | ISO | NiCrFeTi alloy; High-temperature resisting material |
N07750 | ISO | ISO | Ni-Cr Alloy Precipitation Hardenable |
B 637 N07750 Type 1 | ISO | ISO | Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service |
B 637 N07750 Type 2 | ISO | ISO | Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service |
SB-637 N07750 Type 1 | ISO | ISO | Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service |
Inconel X750 | ISO | ISO | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Annealed |