GBT S31653Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | S31653 | GBT | China |
Chemical composition%of the ladle analysis of gradeS31653
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
|---|---|---|---|---|---|---|---|---|
| 0.03 | 1.0 | 2.0 | 0.045 | 0.03 | 16.0-18.0 | 10.0-13.0 | 2.0-3.0 | 0.1-0.16 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 369(≥) | 673(≥) | 33 | 24 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 332 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 958(≥) | 553(≥) | 34 | 44 | 43 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 242 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 755 | 621 | 911 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 316LN | GBT | China | Chemical compositions of SAE wrought stainless steels |
| A 167 Type 316LN | GBT | China | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 182 F 316LN | GBT | China | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| A 213 TP316LN | GBT | China | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| A 240 Type 316LN | GBT | China | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 TP316LN | GBT | China | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 TP316LN | GBT | China | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 276 316LN | GBT | China | Stainless Steel Bars and Shapes |
| A 312 TP316LN | GBT | China | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 336 Grade F316LN | GBT | China | Alloy Steel Forgings for Pressure and High-Temperature Parts |
| A 358 316LN | GBT | China | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| A 376 TP316LN | GBT | China | Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
| A 403 CR316LN | GBT | China | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| A 403 WP 316LN | GBT | China | Intended for pressure piping applications. |
| A 479 316LN | GBT | China | Austenitic Grades |
| A 688 Grade TP 316LN | GBT | China | Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A 813 Grade TP 316LN | GBT | China | Steel pipe intended for high-temperature and general corrosive service. |
| A 814 Grade TP 316LN | GBT | China | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 943 TP316LN | GBT | China | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
| A 955 316LN Grade 280 | GBT | China | Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |