CSN 17 349Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country | 
|---|---|---|---|---|
| Grades | Special Alloy | 17 349 | CSN | Czech Republic | 
Chemical composition%of the ladle analysis of grade17 349
| C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | 
|---|---|---|---|---|---|---|---|
| 0.03 | 1.00 | 20 | 0.045 | 0.03 | 16.5-18.5 | 11.0-14.0 | 2.00-20.50 | 
| Proof strength Rp0.2(MPa)  | Tensile strength Rm(MPa)  | Impact energy KV(J)  | Elongation at fracture A(%)  | Reduction in cross section on fracture Z(%)  | As-Heat-Treated Condition | Brinell hardness(HBW) | 
|---|---|---|---|---|---|---|
| 745(≥) | 295(≥) | 22 | 32 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 442 | 
| Property | Density kg/dm3  | Temperature T °C/F  | Specific heat J/kgK  | Thermal conductivity W/mK  | Electric resistance µΩ·cm  | Modulus of elasticity kN/mm2  | Expansion rate | 
|---|---|---|---|---|---|---|---|
| 584(≥) | 775(≥) | 22 | 21 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 414 | |
| Temp. °C/°F  | Creep strain limit (10000h) (Rp1,0)N/mm2  | Creep rupture strength (10000h) (Rp1,0)N/mm2  | |||||
| 676 | 778 | 619 | 
| Product type | Products | Dimension | Processes | Deliver Status | 
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting | 
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, | 
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting | 
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED | 
| Grade | Standard | Country | Application | 
|---|---|---|---|
| 1Cr17Ni7 | CSN | Czech Republic | High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc  | 
| 1Cr17Mn6Ni5N | CSN | Czech Republic | Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc   | 
| 0Cr17Ni12Mo2 | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger   | 
| 00Cr17Ni14Mo2 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)   | 
| X2CrNiMo18-14-3 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)   | 
| 1.4435 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)   | 
| Z 3 CND 17-11-02 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)   | 
| TS 60 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007)   | 
| 0Cr17Ni12Mo2N | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger  | 
| 00Cr17Ni13Mo2N | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger  | 
| 1Cr17 | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger  | 
| Y1Cr17 | CSN | Czech Republic | Stainless steel bars  | 
| 1Cr17Mo | CSN | Czech Republic | Cold rolled stainless steel sheets and plates  | 
| 00Cr17 | CSN | Czech Republic | Welded stainless steel pipes for liquid delivery  | 
| 00Cr17Mo | CSN | Czech Republic | Cold rolled stainless steel sheets and plates  | 
| 1Cr17Ni2 | CSN | Czech Republic | Stainless steel bars   | 
| 7Cr17 | CSN | Czech Republic | Stainless steel bars  | 
| 8Cr17 | CSN | Czech Republic | Stainless steel bars  | 
| 11Cr17 | CSN | Czech Republic | Stainless steel bars  | 
| Y11Cr17 | CSN | Czech Republic | Stainless steel bars  | 
Relevant products
17-4ph steel wire
17-7PH / 631 COIL Strip Sheet
X40MnCr18 / 1.3817 Non magnetizable steels
ESR AMS 5604 / 5622 / 5643 17-4PH/630 Block
17-4PH(UNS S17400) AMS 5604 hot extruded tube pipe
17-7PH(631,UNS S17700,1.4541) AMS 5528 Stainless Steel Coil
17-4ph(S17400,630) Stainless Steel Sheet
Cold Rolled 1.4122 / X39CrMo17-1 Martensitic Stainless Steel sheet, strip, coil
17-4PH Stainless Steel Seamless Tube
X105CrMo17 Extruded Pipe
X5CrNiCuNb17-4-4 Rod
CSN 17102 Hot Coil
630 / 17-4ph ESR Steel for Equipment for making masks
17 349 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query | 
|---|---|---|---|---|---|---|
| 17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry | 
| 17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry | 
| 17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry | 
| 17-7PH / 631 Coil & Strip, Sheet Stock | 0.3-3.0*10-180mm | Coil or Strip | Kgs | 1236.22 | Cold-Rolled+Annealed | Enquiry | 









