CSN 17 460Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | 17 460 | CSN | Czech Republic |
Chemical composition%of the ladle analysis of grade17 460
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | N(%) |
---|---|---|---|---|---|---|---|
0.12 | 0.9 | 7.00-10.0 | 0.060 | 0.035 | 17.0-20.0 | 4.00-6.00 | 0.10-0.25 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
874(≥) | 461(≥) | 32 | 14 | 13 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 312 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
688(≥) | 869(≥) | 43 | 12 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 222 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
394 | 934 | 788 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
1Cr17Ni7 | CSN | Czech Republic | High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc |
1Cr17Mn6Ni5N | CSN | Czech Republic | Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc |
0Cr17Ni12Mo2 | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr17Ni14Mo2 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
X2CrNiMo18-14-3 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
1.4435 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
Z 3 CND 17-11-02 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
TS 60 | CSN | Czech Republic | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
0Cr17Ni12Mo2N | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger |
00Cr17Ni13Mo2N | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger |
1Cr17 | CSN | Czech Republic | Seamless stainless steel tubes for boiler and heat exchanger |
Y1Cr17 | CSN | Czech Republic | Stainless steel bars |
1Cr17Mo | CSN | Czech Republic | Cold rolled stainless steel sheets and plates |
00Cr17 | CSN | Czech Republic | Welded stainless steel pipes for liquid delivery |
00Cr17Mo | CSN | Czech Republic | Cold rolled stainless steel sheets and plates |
1Cr17Ni2 | CSN | Czech Republic | Stainless steel bars |
7Cr17 | CSN | Czech Republic | Stainless steel bars |
8Cr17 | CSN | Czech Republic | Stainless steel bars |
11Cr17 | CSN | Czech Republic | Stainless steel bars |
Y11Cr17 | CSN | Czech Republic | Stainless steel bars |
Relevant products
17-4ph steel wire
17-7PH / 631 COIL Strip Sheet
X40MnCr18 / 1.3817 Non magnetizable steels
ESR AMS 5604 / 5622 / 5643 17-4PH/630 Block
17-4PH(UNS S17400) AMS 5604 hot extruded tube pipe
17-7PH(631,UNS S17700,1.4541) AMS 5528 Stainless Steel Coil
17-4ph(S17400,630) Stainless Steel Sheet
Cold Rolled 1.4122 / X39CrMo17-1 Martensitic Stainless Steel sheet, strip, coil
17-4PH Stainless Steel Seamless Tube
X105CrMo17 Extruded Pipe
X5CrNiCuNb17-4-4 Rod
CSN 17102 Hot Coil
630 / 17-4ph ESR Steel for Equipment for making masks
1.4605 COIL Strip Sheet
Stainless Steel 446(1.4749, X18CrN28, UNS S44600) Tube Pipe
Alloy 59 (2.4605) Tubes Pipe
17 460 Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry |
17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry |
17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry |
17-7PH / 631 Coil & Strip, Sheet Stock | 0.3-3.0*10-180mm | Coil or Strip | Kgs | 1236.22 | Cold-Rolled+Annealed | Enquiry |