AS 405Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 405 | AS | Australia |
Chemical composition%of the ladle analysis of grade405
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Al(%) |
|---|---|---|---|---|---|---|---|
| 0.08 | 1.00 | 1.00 | 0.04 | 0.030 | 11.5-14.5 | Max 0.60 | 0.10-0.30 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 825(≥) | 746(≥) | 14 | 23 | 41 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 133 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 757(≥) | 288(≥) | 43 | 42 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 232 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 518 | 652 | 655 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S40500 | AS | Australia | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 268 S40500 | AS | Australia | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| A 276 S40500 | AS | Australia | Stainless Steel Bars and Shapes |
| A 473 S40500 | AS | Australia | Stainless Steel Forgings |
| A 580 S40500 | AS | Australia | Stainless Steel Wire |
| S40500 | AS | Australia | Ferritic Chromium Stainless Steel |
| SA-240 S40500 | AS | Australia | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-268 S40500 | AS | Australia | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| X17CrNi16-2 | AS | Australia | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| 1.4057 | AS | Australia | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| SUS 405 | AS | Australia | Stainless steel bars |
| SUS 405 | AS | Australia | Hot-rolled stainless steel plates, sheet and strip |
| SUS 405 | AS | Australia | Cold-rolled stainless steel plate, sheet and strip |
| SUS 405 | AS | Australia | Stainless steel wires |
| SUS 405 | AS | Australia | Heat-resisting steel bars and wire rods |
| SUS 405 | AS | Australia | Heat-resisting steel plate, sheet and strip |
| SUS 405 TB | AS | Australia | Stainless steel boiler and heat exchanger tubes |
| SUS 405 TP | AS | Australia | Stainless steel pipes |
| SUS 405TP | AS | Australia | Stainless steel pipes |
| X17CrNi16-2 | AS | Australia | Stainless steel bars for pressure purposes |