AS 431Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 431 | AS | Australia |
Chemical composition%of the ladle analysis of grade431
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| 0.12-0.20 | 1 | 1 | 0.04 | 0.030 | 15.0-17.0 | 1.50-3.00 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 359(≥) | 473(≥) | 12 | 13 | 24 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 412 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 984(≥) | 463(≥) | 12 | 42 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 134 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 951 | 444 | 577 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 176 S43100 | AS | Australia | Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
| A 276 S43100 | AS | Australia | Stainless Steel Bars and Shapes |
| A 314 S43100 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 473 S43100 | AS | Australia | Stainless Steel Forgings |
| A 493 S43100 | AS | Australia | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| A 580 S43100 | AS | Australia | Stainless Steel Wire |
| F738 Class C3-120 S43100 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class C3-80 S43100 | AS | Australia | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F836 Class C3-120 S43100 | AS | Australia | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| F836 Class C3-80 S43100 | AS | Australia | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
| S43100 | AS | Australia | Nickel Bearing Hardenable Chromium Stainless Steel |
| 1.4310 | AS | Australia | Stainless steels - Part 1: List of stainless steels |
| X2CrNiN18-10 | AS | Australia | Cold heading and cold extruding steels; technical delivery conditions for stainless steels |
| 1.4311 | AS | Australia | Cold heading and cold extruding steels; technical delivery conditions for stainless steels |
| X2CrNiN18-7 | AS | Australia | Cold heading and cold extruding steels; technical delivery conditions for stainless steels |
| SUS 431 | AS | Australia | Stainless steel bars |
| SUS 431 | AS | Australia | Stainless steel wire rods |
| SUS 431 | AS | Australia | Heat-resisting steel bars and wire rods |
| SUS 431 FB | AS | Australia | Stainless steel blooms and billets for forgings |
| SUS 431FB | AS | Australia | Stainless steel blooms and billets for forgings |
