EN EN 95 MnWCrSEnquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | EN 95 MnWCrS | EN | Euronorm |
Chemical composition%of the ladle analysis of gradeEN 95 MnWCrS
C(%) | Si(%) | Mn(%) | P(%) | S(%) |
---|---|---|---|---|
0.90-1.00 | 0.10-0.40 | 1.05-1.35 | 0.030 | 0.030 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
968(≥) | 753(≥) | 31 | 11 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 433 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
344(≥) | 166(≥) | 42 | 32 | 13 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 132 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
191 | 957 | 738 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 1049 S32950 | EN | Euronorm | Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
A 1082 S32950 | EN | Euronorm | High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
A 240 S32950 | EN | Euronorm | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 314 S32950 | EN | Euronorm | Stainless Steel Billets and Bars for Forging |
A 473 S32950 | EN | Euronorm | Stainless Steel Forgings |
A 479 S32950 | EN | Euronorm | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 511 S32950 | EN | Euronorm | Seamless Stainless Steel Mechanical Tubing |
A 789 S32950 | EN | Euronorm | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
A 790 S32950 | EN | Euronorm | Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
A 815 CRS32950 | EN | Euronorm | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
A 815 WPS32950 | EN | Euronorm | Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
A 928 S32950 | EN | Euronorm | Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
A 949 S32950 | EN | Euronorm | Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
A 959 S32950 | EN | Euronorm | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
A 988 S32950 | EN | Euronorm | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
S32950 | EN | Euronorm | Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Nitrogen Stainless Steel |
SA-240 S32950 | EN | Euronorm | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-479 S32950 | EN | Euronorm | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
SA-789 S32950 | EN | Euronorm | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Tubing for General Service |
SA-790 S32950 | EN | Euronorm | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Pipe |