4Cr5W2VSiEnquiry|Print this page
Category | Type | Steel grade | Country |
---|---|---|---|
Grades | Special Alloy | 4Cr5W2VSi | China |
Chemical composition%of the ladle analysis of grade4Cr5W2VSi
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | V(%) | W(%) | Cu(%) |
---|---|---|---|---|---|---|---|---|---|
0.32~0.42 | 0.80~1.20 | ≤0.40 | ≤0.030 | ≤0.030 | 4.50~5.50 | ≤0.20 | 0.60~1.00 | 1.60~2.40 | ≤0.30 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
896(≥) | 443(≥) | 33 | 24 | 32 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 114 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
834(≥) | 933(≥) | 41 | 23 | 24 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 241 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
794 | 872 | 475 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |