L4 Enquiry | Print this page
SAE L4 Details
SAE L4 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Tool Die Steels | L4 | USA - SAE , |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.90 | 1.10 | ||
Si | 0.10 | 0.40 | ||
Mn | 0.50 | 0.70 | ||
Cr | 1.45 | 1.55 | ||
Mo | - | - | ||
V | 0.20 | 0.30 | ||
W | - | - |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
375 (≥) | 229 (≥) | 33 | 22 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 233 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
955 (≥) | 662 (≥) | 32 | 43 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
167 | 421 | 375 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
EVl4 | UNS | USA | Steel for exhaust valves |
15X17AΓl4 | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
12X17P9AHl4 | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
L4 | SAE | USA | Low Alloy Tool Steel |