Location » Home » Grades > Tool Die Steels > X30WCrV9-3, 1.2581, Z30WCV9, H21

DIN X30WCrV9-3, 1.2581, Z30WCV9, H21 Details

X30WCrV9-3, 1.2581, Z30WCV9, H21 Application:Tool steel for hot work with high content of tungsten according

Category Type Grade Designations
Grades Tool Die Steels X30WCrV9-3, 1.2581, Z30WCV9, H21 Germany - DIN , DIN EN ISO 4957-2018 - Tool steels

Chemical composition(wt.%) of X30WCrV9-3, 1.2581, Z30WCV9, H21 grade: DIN EN ISO 4957-2018

Elements Min.(≥) Max.(≤) Similar Remarks
C 0.25 0.35
Si 0.10 0.40
Mn 0.15 0.45
Cr 2.50 3.20
V 0.30 0.50
W 8.50 9.50

Mechanical properties of grade X30WCrV9-3, 1.2581, Z30WCV9, H21 DIN EN ISO 4957-2018

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note

Impact,Kv/Ku(J)

Condition Min Max Similar Note

Elongation,A(%)

Condition Min Max Similar Note

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
+A HB 241
Hardening temperatures 550℃(+/- 10℃) HRC 46
Hardening temperatures 600℃(+/- 10℃) HRC 48

Physical properties of grade X30WCrV9-3, 1.2581, Z30WCV9, H21 DIN EN ISO 4957-2018

Density, ρ Note
8.40 kg/dm³
Thermal conductivity λ20℃ Note
30 W ⋅ m⁻¹ K⁻¹
Coefficient of linear expansion α20-100 ℃ Note
12.4 ⋅12.4⁻⁶ K⁻¹
Modulus of longitudinal elasticity E Note
21000 kG/mm2
Transverse modulus of elasticity G Note
8100 kG/mm3


X30WCrV9-3, 1.2581, Z30WCV9 Tool steel for hot work with high content of tungsten according to DIN EN ISO 4957-2018 Tool steel for hot work with high strength and impact resistance when operating at elevated temperatures. It is characterized by high hardenability and high resistance to tempering. The steel exhibits its mechanical properties only at elevated operating temperatures, therefore it is necessary to heat the finished product in the form of tools before use to a temperature of approx. 300℃ WWV steel is also characterized by low thermal conductivity, which makes it unacceptable to quickly cool the element during operation. Steel for high-load dies for making bolts, nuts and rivets Steel for presses for extruding rods Steel for inserts for dies and stamps Steel for extrusion tools Steel on matrices for extrusion of copper alloys Steel for knives for hot-working scissors Steel on the dies for pressing and forging hot brass and bronze Steel for casting molds under pressure of bronze, brass, new silver, magnesium alloys and aluminum Steel for punches Steel for jaws for thread rolling Steel for dies and pins for pulling hot pipes.

Similar grades

3Ch2V8F, 3Kh2V8F, 3Х2В8Ф, 3Ch2B8F, X30WCrV9-3, X 30 WCrV 9-3, 1.2581, 2581, Z 30 WCV 9, Z30WCV9, X 30 WCrV 9, BH 21, BH21, H 21, H21, ČSN 19721, ČSN 19 721, ČSN 19 723, ČSN 19723, SKD 5, SKD5, SKD 5 M, SKD5M, 3Cr2W8V, X 30 WCrV 9 3 KU, X30WCrV93KU

X30WCrV9-3, 1.2581, Z30WCV9, H21 - Form of Supply

Product type Products Dimension Processes Deliver Status
Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Steel Bar Round Bar, Flat Bar, Square Bar Φ8-1200mm*L Forging, hot rolling and cold rolling, Cast Black, Rough Turning, Shot Blasting,
Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting
Pipes / Tubes Seamless Pipes/Tubes, Welded Pipes/Tubes OD:6-219mm x WT:0.5-20.0mm Hot extrusion, Cold Drawn, Welded Annealed, Solution and Aging, Q+T, ACID-WASHED

Cross Reference Table(Equivalent Grade)

Grade Standard Country Application
X30WCrV9-3, 1.2581, Z30WCV9, H21 DIN Germany
Tool steel for hot work with high content of tungsten according

Relevant products

Enquiry