45SCD6, 46SiCrMo6, 1.8062 Enquiry | Print this page
AFNOR 45SCD6, 46SiCrMo6, 1.8062 Details
AFNOR 45SCD6, 46SiCrMo6, 1.8062 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Aviation and Aero Steel | 45SCD6, 46SiCrMo6, 1.8062 | France - AFNOR , AIR 9160 C - wrought steels used in aeronautical constructions EN 10089 - Hot rolled steels for quenched and tempered springs AF NF A35-571 - SPECIAL STRUCTURAL STEELS SUITABLE FOR THE MANUFACTURE OF SUSPENSION COMPONENTS |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.42 | 0.50 | ||
Si | 1.30 | 1.70 | ||
Mn | 0.50 | 0.80 | ||
P | - | 0.025 | ||
S | - | 0.020 | ||
Cr | 0.50 | 0.70 | ||
Mo | 0.15 | 0.35 |
Mechanical properties of grade 45SCD6, 46SiCrMo6, 1.8062 AIR 9160 C
Yield Strength,Rp 0.2(MPa)
Condition | Min | Max | Similar | Note |
---|---|---|---|---|
1400 |
Tensile Strength,Rm(MPa)
Condition | Min | Max | Similar | Note |
---|---|---|---|---|
1550 | 1850 |
Impact,Kv/Ku(J)
Condition | Min | Max | Similar | Note |
---|---|---|---|---|
10 |
Elongation,A(%)
Condition | Min | Max | Similar | Note |
---|---|---|---|---|
6 |
Reduction of area,(%)
Condition | Min | Max | Similar | Note |
---|---|---|---|---|
35 |
Hardness
Condition | Type | Min | Max | Similar | Note |
---|---|---|---|---|---|
+S | HB | 280 | |||
+A | HB | 248 | |||
+AC | HB | 230 |
Related properties
Heat treatment - Hardening at 880 ℃ with cooling in water or oil |
Heat treatment - Tempering at a tempering of 450℃ |
45SCD6 Air 9160C wrought steels used in aeronautical constructions
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
45SCD6, 46SiCrMo6, 1.8062 | AFNOR | France | wrought steels used in aeronautical constructions |