SA-965 S34700 Enquiry | Print this page
AMS SA-965 S34700 Details
AMS SA-965 S34700 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SA-965 S34700 | Austenite | USA - AMS , SA-965/SA-965M - Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.08 | ||
Mn | - | 2.00 | ||
Si | - | 1.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 17.00 | 19.00 | ||
Ni | 9.00 | 13.00 | ||
Ta | - | 1.10 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
163 (≥) | 543 (≥) | 22 | 44 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
887 (≥) | 658 (≥) | 43 | 21 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
591 | 181 | 232 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S34700 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S34700 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 269 S34700 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 276 S34700 | SAE | USA | Stainless Steel Bars and Shapes |
A 313 S34700 | SAE | USA | Stainless Steel Spring Wire |
A 314 S34700 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 358 S34700 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A 409 S34700 | SAE | USA | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
A 473 S34700 | SAE | USA | Stainless Steel Forgings |
A 580 S34700 | SAE | USA | Stainless Steel Wire |
A 632 S34700 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
A 778 S34700 | SAE | USA | Welded, Unannealed Austenitic Stainless Steel Tubular Products |
A 813 S34700 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
A 814 S34700 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
A 965 S34700 | SAE | USA | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
F738 Class A2-50 S34700 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class A2-70 S34700 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class A2-80 S34700 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F836 Class A2-50 S34700 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
F836 Class A2-70 S34700 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |