A 268 S42900 Enquiry | Print this page
SAE A 268 S42900 Details
SAE A 268 S42900 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 268 S42900 | Ferrite | USA - SAE , A 268/A 268M (2010) - Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.12 | ||
| Mn | - | 1.00 | ||
| Si | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 14.00 | 16.00 | ||
| Ni | - | - | ||
| Mo | - | 0.75 |
Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 657 (≥) | 499 (≥) | 44 | 12 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 561 (≥) | 188 (≥) | 23 | 14 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 312 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 999 | 458 | 841 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S42900 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 268 S42900 | SAE | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| A 276 S42900 | SAE | USA | Stainless Steel Bars and Shapes |
| A 314 S42900 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 S42900 | SAE | USA | Stainless Steel Forgings |
| A 493 S42900 | SAE | USA | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| S42900 | AISI | USA | Ferritic Chromium Stainless Steel |
| SA-240 S42900 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-268 S42900 | AMS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
| SUS 429 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
| SUS 429 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
| SUS 429J1 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
| SUS 429J1 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
| SUS 429 J1 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
| SUS 429 J1 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
| X2CrNiMoN17-13-3 | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 1.4429 | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| X2CrNiMoN17-13-3 | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 1.4429 | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| STS429 | KS | Korea | Hot rolled stainless steel plates, sheets and strip |