A 959 S32520 Enquiry | Print this page
SAE A 959 S32520 Details
SAE A 959 S32520 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 959 S32520 | Austenitic-Ferritic(Duplex steel) | USA - SAE , A 959 (2011) - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.03 | ||
| Mn | - | 1.50 | ||
| Si | - | 0.80 | ||
| P | - | 0.035 | ||
| S | - | 0.02 | ||
| Cr | 24.00 | 26.00 | ||
| Ni | 5.50 | 8.00 | ||
| Mo | 3.00 | 5.00 | ||
| N | 0.20 | 0.35 | ||
| Cu | 0.05 | 3.00 |
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 416 (≥) | 171 (≥) | 32 | 41 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 321 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 523 (≥) | 724 (≥) | 44 | 13 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 474 | 256 | 555 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 1049 S32520 | SAE | USA | Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
| A 240 S32520 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 789 S32520 | SAE | USA | Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| A 790 S32520 | SAE | USA | Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
| A 928 S32520 | SAE | USA | Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
| A 959 S32520 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| S32520 | AISI | USA | Duplex (Austenitic-Ferritic) Chromium Nickel Molybdenum Copper Nitrogen Stainless Steel |
| SA-240 S32520 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-789 S32520 | AMS | USA | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Tubing for General Service |
| SA-790 S32520 | AMS | USA | Specification for Seamless and Welded Ferritic /Austenitic Stainless Steel Pipe |