A 314 S41400 Enquiry | Print this page
SAE A 314 S41400 Details
SAE A 314 S41400 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 314 S41400 | Martensite | USA - SAE , A 314 (2013) - Stainless Steel Billets and Bars for Forging |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.15 | ||
Mn | - | 1.00 | ||
Si | - | 1.00 | ||
P | - | 0.04 | ||
S | - | 0.03 | ||
Cr | 11.50 | 13.50 | ||
Ni | 1.25 | 2.50 | ||
Mo | - | - |
Stainless Steel Billets and Bars for Forging
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
977 (≥) | 446 (≥) | 43 | 23 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 223 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
577 (≥) | 683 (≥) | 31 | 22 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
677 | 877 | 381 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
GH4141 | GB | China | Iron-based superalloy |
GH4145 | GB | China | Nickel-base superalloy |
GH4146 | GB | China | Nickel-base superalloy |
A 276 S41400 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S41400 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 473 S41400 | SAE | USA | Stainless Steel Forgings |
A 580 S41400 | SAE | USA | Stainless Steel Wire |
S41400 | AISI | USA | Martensitic Chromium Stainless Steel |
A 276 S41425 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S41425 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 473 S41425 | SAE | USA | Stainless Steel Forgings |
A 479 S41425 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 565 S41425 | SAE | USA | Martensitic Stainless Steel Bars for High-Temperature Service |
A 959 S41425 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
S41425 | AISI | USA | Martensitic Chromium Nickel Molybdenum Nitrogen Stainless Steel |
SA-479 S41425 | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
NV7(4140) | UNS | USA | Steel for intake valves |
H41400 | AISI | USA | Steel for intake valves |
1.2414 | DIN | Germany | Alloyed W steel |