F738 Class C4-70 S41600 Enquiry | Print this page
SAE F738 Class C4-70 S41600 Details
SAE F738 Class C4-70 S41600 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | F738 Class C4-70 S41600 | Martensite | USA - SAE , F 738M (2002) - Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.15 | ||
Mn | - | 1.25 | ||
Si | - | 1.00 | ||
P | - | 0.06 | ||
S | - | 0.15 | ||
Cr | 12.00 | 14.00 | ||
Ni | - | - | ||
Mo | - | - |
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
985 (≥) | 291 (≥) | 41 | 42 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
815 (≥) | 826 (≥) | 32 | 33 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
658 | 929 | 493 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
GH4169 | GB | China | Classification and designation for superalloys and high temperature intermetallic materials |
A 314 S41600 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 581 S41600 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
A 582 S41600 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
A 895 S41600 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
F738 Class C4-50 S41600 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class C4-70 S41600 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F836 Class C4-110 S41600 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
F836 Class C4-70 S41600 | SAE | USA | Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric) |
S41600 | AISI | USA | Martensitic Free-Machining Stainless Steel |
A 581 S41610 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
A 582 S41610 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
S41610 | AISI | USA | Martensitic Chromium Free Machining Stainless Steel |
A 314 S41623 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 473 S41623 | SAE | USA | Stainless Steel Forgings |
A 581 S41623 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
A 582 S41623 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
A 895 S41623 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
F738 Class C4-50 S41623 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
F738 Class C4-70 S41623 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |