SA-693 S17600 Enquiry | Print this page
AMS SA-693 S17600 Details
AMS SA-693 S17600 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SA-693 S17600 | Precipitation-Hardening | USA - AMS , SA-693 - Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Mn | - | 1.00 | ||
| Si | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 16.00 | 17.50 | ||
| Ni | 6.00 | 7.50 | ||
| Mo | - | - | ||
| Al | - | 0.40 | ||
| Ti | 0.40 | 1.20 |
Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 688 (≥) | 687 (≥) | 31 | 33 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 221 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 128 (≥) | 539 (≥) | 22 | 43 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 467 | 683 | 999 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 316Ti | UNS | USA | Chemical compositions of SAE wrought stainless steels |
| A 167 Type 316Ti | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 182 F 316Ti | SAE | USA | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| A 213 TP316Ti | SAE | USA | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| A 240 Type 316Ti | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 276 316Ti | SAE | USA | Stainless Steel Bars and Shapes |
| A 312 TP316Ti | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 314 316Ti | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 368 Type 316Ti | SAE | USA | Stainless Steel Wire Strand |
| A 478 Type 316Ti | SAE | USA | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 479 316Ti | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A 959 Type 316Ti | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| SA-182 F 316Ti | AMS | USA | Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| SA-213 316Ti | AMS | USA | Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| SA-276 316Ti | AMS | USA | Specification for Stainless Steel Bars and Shapes |
| SA-479 Type 316Ti | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| SUS316Ti | AMS | USA | Specification for stainless steel bars |
| SA-312 S31635 | AMS | USA | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| SA-240 S31635 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| S31635 | AISI | USA | Austenitic Chromium Nickel Molybdenum Stainless Steel (Titanium Stabilized) |