S21600 Enquiry | Print this page
AISI S21600 Details
AISI S21600 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | S21600 | Austenite | USA - AISI , |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.08 | ||
Si | - | 0.75 | ||
Mn | 7.50 | 9.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 17.5 | 22.0 | ||
Ni | 5.00 | 7.00 | ||
Mo | 2.00 | 3.00 | ||
N | 0.25 | 0.50 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
192 (≥) | 281 (≥) | 11 | 24 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 314 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
544 (≥) | 448 (≥) | 34 | 33 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 212 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
787 | 946 | 482 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
216 | YB | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-479 Type XM-17 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 240 Type XM-17 | UNS | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 479 XM-17 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 492 Type XM-17 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 959 Type XM-17 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
S21600 | AISI | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
216L | YB | USA | Chemical compositions of SAE wrought stainless steels |
S21603 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
A 240 S21600 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 492 S21600 | SAE | USA | Stainless Steel Rope Wire |
S21600 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
SA-240 S21600 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 240 S21603 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 492 S21603 | SAE | USA | Stainless Steel Rope Wire |
S21603 | AISI | USA | Austenitic Chromium Manganese Nickel Molybdenum Stainless Steel |
SA-240 S21603 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 216 Grade WCA | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
A 216 Grade WCB | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
A 216 Grade WCC | SAE | USA | Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |