SA-240 S21400 Enquiry | Print this page
AMS SA-240 S21400 Details
AMS SA-240 S21400 Standard Download
SA-240 S21400 Application:Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SA-240 S21400 | Austenite | USA - AMS , SA-240/SA-240M - Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Chemical composition(wt.%) of SA-240 S21400 grade: SA-240/SA-240M
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.12 | ||
| Mn | 14.50 | 16.00 | ||
| Si | 0.30 | 1.00 | ||
| P | - | 0.045 | ||
| S | - | 0.03 | ||
| Cr | 17.00 | 18.50 | ||
| Ni | - | 0.75 | ||
| Mo | - | - | ||
| N | - | 0.35 |
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Mechanical properties of grade SA-240 S21400 SA-240/SA-240M
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 612 (≥) | 841 (≥) | 33 | 43 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 |
Physical properties of grade SA-240 S21400 SA-240/SA-240M
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 449 (≥) | 648 (≥) | 34 | 11 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 111 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 218 | 869 | 765 |
SA-240 S21400 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S21400 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 580 S21400 | SAE | USA | Stainless Steel Wire |
| S21400 | AISI | USA | Austenitic Chromium Manganese Stainless Steel |
| SA-240 S21400 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| XM-31 | UNS | USA | Chemical compositions of SAE wrought stainless steels |
| S21400 | AISI | USA | Chemical compositions of SAE wrought stainless steels |
Enquiry
* Required fields