A 312 TPXM-10 Enquiry | Print this page
SAE A 312 TPXM-10 Details
SAE A 312 TPXM-10 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 312 TPXM-10 | Austenite | USA - SAE , A 312/A 312M (2012) - Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.08 | ||
Si | - | 1.00 | ||
Mn | 8.00 | 10.0 | ||
P | - | 0.06 | ||
S | - | 0.03 | ||
Cr | 19.0 | 21.0 | ||
Ni | 5.50 | 7.50 | ||
N | 0.15 | 0.40 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
473 (≥) | 737 (≥) | 21 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
111 (≥) | 493 (≥) | 34 | 13 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 312 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
131 | 189 | 218 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 276 XM-10 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 XM-10 | SAE | USA | Stainless Steel Bars and Shapes |
A 473 XM-10 | SAE | USA | Stainless Steel Forgings |
A 580 Type XM-10 | SAE | USA | Stainless Steel Wire |
A 813 Grade TP XM-10 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
A 814 Grade TP XM-10 | SAE | USA | Stainless Steel Wire |
A 943 TPXM-10 | SAE | USA | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
A 269 TPXM-10 | SAE | USA | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
A 312 TPXM-10 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A 959 Type XM-10 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
SA-276 XM-10 | AMS | USA | Specification for Stainless Steel Bars and Shapes |
SA-312 TPXM-10 | AMS | USA | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
SA-813 TPXM-10 | AMS | USA | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
SA-814 TP XM-10 | AMS | USA | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
A 269 S21900 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 276 S21900 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S21900 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 473 S21900 | SAE | USA | Stainless Steel Forgings |
A 580 S21900 | SAE | USA | Stainless Steel Wire |
A 580 S21900 | SAE | USA | Stainless Steel Wire |