A 581 S30310 Enquiry | Print this page
SAE A 581 S30310 Details
SAE A 581 S30310 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 581 S30310 | Austenite | USA - SAE , A 581/A 581M (2009) - Free-Machining Stainless Steel Wire and Wire Rods |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Mn | 2.50 | 4.50 | ||
| Si | - | 1.00 | ||
| P | - | 0.02 | ||
| S | - | 0.25 | ||
| Cr | 17.00 | 19.00 | ||
| Ni | 7.00 | 10.00 | ||
| Mo | - | 0.60 |
Free-Machining Stainless Steel Wire and Wire Rods
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 824 (≥) | 318 (≥) | 44 | 12 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 369 (≥) | 617 (≥) | 34 | 13 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 213 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 791 | 225 | 346 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 581 S30310 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S30310 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| S30310 | AISI | USA | Austenitic Chromium Nickel Manganese Free-Machining Stainless Steel |
| S30310 | AISI | USA | Austenitic Chromium Nickel Manganese Free-Machining Stainless Steel |