A 240 S31640 Enquiry | Print this page
SAE A 240 S31640 Details
SAE A 240 S31640 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 240 S31640 | Austenite | USA - SAE , A 240/A 240M (2013) - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.08 | ||
Mn | - | 2.00 | ||
Si | - | 1.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 16.00 | 18.00 | ||
Ni | 10.00 | 14.00 | ||
Mo | 2.00 | 3.00 | ||
N | - | 0.10 | ||
Ti+Ta | 10×C% | - |
Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
164 (≥) | 934 (≥) | 42 | 32 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
583 (≥) | 256 (≥) | 13 | 12 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
415 | 915 | 215 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S31640 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 276 S31640 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S31640 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 368 S31640 | SAE | USA | Stainless Steel Wire Strand |
A 478 S31640 | SAE | USA | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
S31640 | AISI | USA | Austenitic Chromium Nickel Molybdenum Stainless Steel (Columbium Stabilized) |
SA-240 S31640 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
316Cb | UNS | USA | Chemical compositions of SAE wrought stainless steels |
A 167 Type 316Cb | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A 240 Type 316Cb | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 276 316Cb | SAE | USA | Stainless Steel Bars and Shapes |
A 314 316Cb | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 368 Type 316Cb | SAE | USA | Stainless Steel Wire Strand |
A 478 Type 316Cb | SAE | USA | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
A 479 316Cb | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 959 Type 316Cb | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
SA-276 316Cb | AMS | USA | Specification for Stainless Steel Bars and Shapes |
SA-479 Type 316Cb | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 240 S31640 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 276 S31640 | SAE | USA | Stainless Steel Bars and Shapes |