SA-814 S38100 Enquiry | Print this page
AMS SA-814 S38100 Details
AMS SA-814 S38100 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SA-814 S38100 | Austenite | USA - AMS , SA-814/SA-814M - Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Mn | - | 2.00 | ||
| Si | 1.50 | 2.50 | ||
| P | - | 0.03 | ||
| S | - | 0.03 | ||
| Cr | 17.00 | 19.00 | ||
| Ni | 17.50 | 18.50 | ||
| Mo | - | - |
Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 459 (≥) | 555 (≥) | 12 | 24 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 614 (≥) | 514 (≥) | 23 | 31 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 368 | 477 | 458 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S38100 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 S38100 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 S38100 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 813 S38100 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A 814 S38100 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 959 S38100 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| S38100 | AISI | USA | Austenitic Chromium Nickel Silicon Stainless Steel |
| SA-240 S38100 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-813 S38100 | AMS | USA | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
| SA-814 S38100 | AMS | USA | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 813 S38100 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A 240 S38100 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 S38100 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 S38100 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 814 S38100 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 959 S38100 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| S38100 | AISI | USA | Austenitic Chromium Nickel Silicon Stainless Steel |
| SA-240 S38100 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SA-813 S38100 | AMS | USA | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
| SA-814 S38100 | AMS | USA | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |