A 564 631 Enquiry | Print this page
SAE A 564 631 Details
SAE A 564 631 Standard Download
A 564 631 Application:Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 564 631 | Precipitation-Hardening | USA - SAE , A 564/A 564M (2010) - Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
Chemical composition(wt.%) of A 564 631 grade: A 564/A 564M (2010)
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.09 | ||
| Mn | - | 1.00 | ||
| Si | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 16.00 | 18.00 | ||
| Ni | 6.50 | 7.75 | ||
| Mo | - | - | ||
| Al | 0.75 | 1.50 |
Mechanical properties of grade A 564 631 A 564/A 564M (2010)
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 616 (≥) | 582 (≥) | 44 | 32 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Physical properties of grade A 564 631 A 564/A 564M (2010)
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 682 (≥) | 333 (≥) | 12 | 24 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 313 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 946 | 725 | 166 |
A 564 631 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| 0Cr17Ni7Al | GB | China | Heat-resisting steel sheets and plates |
| 0Cr17Ni7Al | GB | China | Heat-resisting steel sheets and plates |
| S63198 | AISI | USA | Iron Base Superalloy |
| A 313 S17700 | SAE | USA | Stainless Steel Spring Wire |
| A 564 S17700 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S17700 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S17700 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| S17700 | AISI | USA | Precipitation Hardenable Chromium Nickel Aluminum Stainless Steel |
| SA-564 S17700 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S17700 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S17700 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
| S63198 | AISI | USA | Iron Base Superalloy |
| A 313 S17700 | SAE | USA | Stainless Steel Spring Wire |
| A 564 S17700 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A 693 S17700 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A 705 S17700 | SAE | USA | Age-Hardening Stainless Steel Forgings |
| S17700 | AISI | USA | Precipitation Hardenable Chromium Nickel Aluminum Stainless Steel |
| SA-564 S17700 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| SA-693 S17700 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| SA-705 S17700 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
Relevant products
A 564 631 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| 17-7PH / 631 Coil & Strip, Sheet Stock | 0.3-3.0*10-180mm | Coil or Strip | Kgs | 1236.22 | Cold-Rolled+Annealed | Enquiry |
Enquiry
* Required fields