SA-541 Class 8A Enquiry | Print this page
AMS SA-541 Class 8A Details
AMS SA-541 Class 8A Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SA-541 Class 8A | Precipitation-Hardening | USA - AMS , SA-541/SA-541M - Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.20 | ||
Si | - | 0.50 | ||
Mn | - | 1.00 | ||
P | - | - | ||
S | - | - | ||
Ni | - | - | ||
Cr | - | 12.50 | ||
Al | - | - | ||
Cu | - | - | ||
Ti | - | - | ||
Fe | - | remaining | ||
N | - | - | ||
Mo | - | - | ||
W | - | 3.00 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
679 (≥) | 651 (≥) | 24 | 34 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
161 (≥) | 136 (≥) | 33 | 22 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 121 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
821 | 394 | 917 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
GH4180 | GB | China | Nickel-base superalloy |
A 565 S41800 | SAE | USA | Martensitic Stainless Steel Bars for High-Temperature Service |
S41800 | AISI | USA | Martensitic Chromium Wolfram Nickel Stainless and Heat Resisting Steel |
A 565 S41800 | SAE | USA | Martensitic Stainless Steel Bars for High-Temperature Service |
S41800 | AISI | USA | Martensitic Chromium Wolfram Nickel Stainless and Heat Resisting Steel |
A 565 S41800 | SAE | USA | Martensitic Stainless Steel Bars for High-Temperature Service |
S41800 | AISI | USA | Martensitic Chromium Wolfram Nickel Stainless and Heat Resisting Steel |
1.4418 | AMS | USA | Specification for flat products made of steels for pressure purposes - Part 7: Stainless steels |
A 534 18CrNiMo7-6 | SAE | USA | Carburizing Steels for Anti-Friction Bearings |
A 534 18NiCrMo14-6 | SAE | USA | Carburizing Steels for Anti-Friction Bearings |
A 541 Class 8 | SAE | USA | Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
A 541 Class 8A | SAE | USA | Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
A 854 Grade 180 | SAE | USA | Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
A 920 Grade 11V41 Class 80 | SAE | USA | Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
A 920 Grade 15V41 Class 80 | SAE | USA | Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
B418 Type 1 | SAE | USA | Standard Specification for Cast and Wrought Galvanic Zinc Anodes |
B418 Type 2 | SAE | USA | Standard Specification for Cast and Wrought Galvanic Zinc Anodes |
C14180 | AISI | USA | Copper brazing filler metal |
C14181 | AISI | USA | Copper vacuum grade brazing filler metal |
K14185 | AISI | USA | Alloy Steel |