A 895 S30300 Enquiry | Print this page
SAE A 895 S30300 Details
SAE A 895 S30300 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 895 S30300 | Austenite | USA - SAE , A 895 (2009) - Free-Machining Stainless Steel Plate, Sheet, and Strip |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.15 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.2 | ||
| S | 0.15 | - | ||
| Cr | 17.0 | 19.0 | ||
| Ni | 8.00 | 10.0 | ||
| Mo | - | 0.60 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 149 (≥) | 911 (≥) | 33 | 12 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 141 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 594 (≥) | 587 (≥) | 13 | 23 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 197 | 864 | 691 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH3030 | GB | China | Classification and designation for superalloys and high temperature intermetallic materials |
| GH3039 | GB | China | Classification and designation for superalloys and high temperature intermetallic materials |
| 303 | YB | USA | Stainless Steel Billets and Bars for Forging |
| A 314 303 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 303 | SAE | USA | Stainless Steel Forgings |
| A 581 Type 303 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 Type 303 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 Type 303 | SAE | USA | Free-Machining Stainless Steel Plate, Sheet, and Strip |
| A 959 Type 303 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| A 314 S30300 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 S30300 | SAE | USA | Stainless Steel Forgings |
| A 581 S30300 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
| A 582 S30300 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| A 895 S30300 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
| F 837 Class A1-50 S30300 | SAE | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F 837 Class A1-55 S30300 | SAE | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F 837 Class A1-70 S30300 | SAE | USA | Standard Specification for Stainless Steel Socket Head Cap Screws (Metric) |
| F738 Class A1-50 S30300 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class A1-70 S30300 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
| F738 Class A1-80 S30300 | SAE | USA | Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs |
