SUS 317L Enquiry | Print this page
JIS SUS 317L Details
JIS SUS 317L Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | SUS 317L | Austenite | Japan - JIS , G 4308 (2007) - Stainless steel wire rods |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.03 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.045 | ||
| S | - | 0.03 | ||
| Cr | 18.00 | 20.00 | ||
| Ni | 11.00 | 15.00 | ||
| Mo | 3.00 | 4.00 | ||
| N | - | - |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 157 (≥) | 336 (≥) | 24 | 23 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 524 (≥) | 595 (≥) | 42 | 12 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 555 | 849 | 898 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| SUS 317 LFB | JIS | Japan | Stainless steel blooms and billets for forgings |
| SUS 317 LTB | JIS | Japan | Stainless steel boiler and heat exchanger tubes |
| SUS 317 LTP | JIS | Japan | Stainless steel pipes |
| SUS 317L | JIS | Japan | Stainless steel bars |
| SUS 317L | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
| SUS 317L | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
| SUS 317L | JIS | Japan | Stainless steel wire rods |
| SUS 317L | JIS | Japan | Stainless steel wires |
| SUS 317L TPY | JIS | Japan | Large diameter welded stainless steel pipes |
| KSUS317L | NKK | Japan | Rolled Stainless Steels |
| KSUS 317LN | NKK | Japan | Rolled Stainless Steels |
| SUS 316LFB | JIS | Japan | Stainless steel blooms and billets for forgings |
| SUS 317L TP | JIS | Japan | Stainless steel pipes |
| SUS 317L TP Y | JIS | Japan | Large diameter welded stainless steel pipes |