S30360 Enquiry | Print this page
AISI S30360 Details
AISI S30360 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | S30360 | Austenite | USA - AISI , |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.15 | ||
Si | - | 1.00 | ||
Mn | - | 2.00 | ||
P | - | 0.04 | ||
S | 0.12 | 0.25 | ||
Cr | 17.0 | 19.0 | ||
Ni | 8.00 | 10.0 | ||
Mo | - | 0.60 | ||
Pb | 0.12 | 0.30 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
288 (≥) | 437 (≥) | 33 | 23 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 244 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
615 (≥) | 673 (≥) | 32 | 44 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
435 | 611 | 631 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
303 Pb | UNS | USA | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
303Pb | ASTM | USA | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
XM-3 | SAE | USA | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
S30360 | AISI | USA | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated |
XM-31 | UNS | USA | Chemical compositions of SAE wrought stainless steels |
S21400 | AISI | USA | Chemical compositions of SAE wrought stainless steels |
A 240 S44626 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 268 S44626 | SAE | USA | Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
S44626 | AISI | USA | Ferritic Chromium Molybdenum Titanium Stainless Steel |
SA-240 S44626 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-268 S44626 | AMS | USA | Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
A 581 S18200 | SAE | USA | Free-Machining Stainless Steel Wire and Wire Rods |
A 582 S18200 | SAE | USA | Standard Specification for Free-Machining Stainless Steel Bars |
S18200 | AISI | USA | Ferritic Chromium Molybdenum Free-Machining Stainless Steel (18-2FM) |
A 276 S41040 | SAE | USA | Stainless Steel Bars and Shapes |
S41040 | AISI | USA | Martensitic Chromium Stainless Steel with Columbium |
A 240 S21400 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 580 S21400 | SAE | USA | Stainless Steel Wire |