SUS 304 L Enquiry | Print this page
JIS SUS 304 L Details
JIS SUS 304 L Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SUS 304 L | Austenite | Japan - JIS , G 4320 (2003) - Cold-formed stainless steel sections |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.03 | ||
Si | - | 1.00 | ||
Mn | - | 2.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 18.00 | 20.00 | ||
Ni | 9.00 | 13.00 | ||
Mo | - | - | ||
N | - | - |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
836 (≥) | 316 (≥) | 34 | 23 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 343 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
557 (≥) | 761 (≥) | 31 | 21 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 123 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
571 | 341 | 662 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
KSUS304L | NKK | Japan | Rolled Stainless Steels |
KSUS304 LN | NKK | Japan | Rolled Stainless Steels |
SUS 304 LFB | JIS | Japan | Stainless steel blooms and billets for forgings |
SUS304LN | JIS | Japan | Stainless steel bars |
SUS304LN | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
SUS304LN | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
SUS 304 LTB | JIS | Japan | Stainless steel boiler and heat exchanger tubes |
SUS 304 LTP | JIS | Japan | Stainless steel pipes |
SUS 304 L | JIS | Japan | Stainless steel bars |
SUS 304 L | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
SUS 304 L | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
SUS 304 L | JIS | Japan | Stainless steel wire rods |
SUS 304 L | JIS | Japan | Stainless steel wires |
SUS 304 L | JIS | Japan | Hot-formed stainless steel sections |
SUS 304 L | JIS | Japan | Cold finished stainless steel bars |
SUS 304 L | JIS | Japan | Cold-formed stainless steel sections |
SUS 304LTBS | JIS | Japan | Stainless steel sanitary pipes |
SUS 304L TPY | JIS | Japan | Large diameter welded stainless steel pipes |
SUS 304L-WSA | JIS | Japan | Stainless steel wires for cold heading and cold forging |
SUS 304L-WSB | JIS | Japan | Stainless steel wires for cold heading and cold forging |