SUH 409L Enquiry | Print this page
JIS SUH 409L Details
JIS SUH 409L Standard Download
| Category | Type | Grade | Microstructure | Designations | 
|---|---|---|---|---|
| Grades | Stainless Steels | SUH 409L | Martensite | Japan - JIS ,    G 4312 (2011) - Heat-resisting steel plate, sheet and strip | 
| Elements | Min.(≥) | Max.(≤) | Similar | Remarks | 
|---|---|---|---|---|
| C | 0.75 | 0.85 | ||
| Si | 1.75 | 2.25 | ||
| Mn | 0.20 | 0.60 | ||
| P | - | 0.03 | ||
| S | - | 0.03 | ||
| Cr | 19.00 | 20.50 | ||
| Ni | 1.15 | 1.65 | ||
| Mo | - | - | 
| Proof strength Rp0.2 (MPa) | Tensile strength Rm (MPa) | Impact energy KV (J) | Elongation at fracture A (%) | Reduction in cross section on fracture Z (%) | As-Heat-Treated Condition | Brinell hardness (HBW) | 
|---|---|---|---|---|---|---|
| 652 (≥) | 339 (≥) | 33 | 33 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 | 
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J / kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate | 
|---|---|---|---|---|---|---|---|
| 386 (≥) | 737 (≥) | 22 | 33 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 334 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0) N/mm2 | Creep rupture strength (10000h) (Rp1,0) N/mm2 | |||||
| 535 | 423 | 289 | 
| Product type | Products | Dimension | Processes | Deliver Status | 
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, | 
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting | 
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED | 
| Grade | Standard | Country | Application | 
|---|---|---|---|
| SUH 446 | JIS | Japan | Stainless steel wires | 
| SUH 446 | JIS | Japan | Heat-resisting steel bars and wire rods | 
| SUH 446 | JIS | Japan | Heat-resisting steel plate, sheet and strip | 
| SUH 4 | JIS | Japan | Heat-resisting steel bars and wire rods | 
| SUH 409 | JIS | Japan | Heat-resisting steel plate, sheet and strip | 
| SUH 409L | JIS | Japan | Heat-resisting steel plate, sheet and strip | 
| SUH 11 | JIS | Japan | Heat-resisting steel bars and wire rods | 
