CFS 316S31 Enquiry | Print this page
B.S. CFS 316S31 Details
B.S. CFS 316S31 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Stainless Steels | CFS 316S31 | UK - B.S. , BS 3605-1 - Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.07 | ||
Si | - | 1.00 | ||
Mn | - | 2.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 16.50 | 18.50 | ||
Mo | 2.00 | 2.50 | ||
Ni | 10.50 | 13.50 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
159 (≥) | 435 (≥) | 34 | 14 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
565 (≥) | 971 (≥) | 23 | 32 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
566 | 311 | 393 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
316S31 | B.S. | UK | Specification for wrought steels for mechanical and allied engineering purposes. Bright bars for general engineering purposes |
CFS 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
HFM 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
HFS 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for seamless tubes |
LW 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for longitudinally welded tubes |
LWCF 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for longitudinally welded tubes |
LWHT 316S31 | B.S. | UK | Austenitic stainless steel pipes and tubes for pressure purposes. Specification for longitudinally welded tubes |