1.8550 Enquiry | Print this page
DIN 1.8550 Details
DIN 1.8550 Standard Download
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | 1.8550 | Germany - DIN , DIN EN 10085 - Al-alloyed nitriding steel grade for large cross-sections. Suitable for piston rods, extruders, cylinders, gear wheels, |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.30 | 0.37 | ||
| Si | - | 0.40 | ||
| Mn | 0.40 | 0.70 | ||
| P | - | 0.025 | ||
| S | - | 0.035 | ||
| Al | 0.80 | 1.20 | ||
| Cr | 1.50 | 1.80 | ||
| Mo | 0.15 | 0.25 | ||
| Ni | 0.85 | 1.15 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 248 (≥) | 593 (≥) | 42 | 21 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 189 (≥) | 191 (≥) | 11 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 144 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 584 | 164 | 992 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 34CrAlNi7 | DIN | Germany | Al-alloyed nitriding steel grade for large cross-sections. Suitable for piston rods, extruders, cylinders, gear wheels, |
| 1.8550 | DIN | Germany | Al-alloyed nitriding steel grade for large cross-sections. Suitable for piston rods, extruders, cylinders, gear wheels, |
| V820 | DIN | Germany | Al-alloyed nitriding steel grade for large cross-sections. Suitable for piston rods, extruders, cylinders, gear wheels, |