A 409 S30403 Enquiry | Print this page
SAE A 409 S30403 Details
SAE A 409 S30403 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 409 S30403 | Austenite | USA - SAE , A 409/A 409M (2009) - Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.03 | ||
Si | - | 1.00 | ||
Mn | - | 2.00 | ||
P | - | 0.045 | ||
S | - | 0.03 | ||
Cr | 18.0 | 20.0 | ||
Ni | 8.00 | 12.0 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
334 (≥) | 824 (≥) | 24 | 13 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 431 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
458 (≥) | 422 (≥) | 32 | 32 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 122 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
136 | 713 | 631 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S30403 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S30403 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 269 S30403 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 270 S30403 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
A 276 S30403 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S30403 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 358 S30403 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A 409 S30403 | SAE | USA | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
A 473 S30403 | SAE | USA | Stainless Steel Forgings |
A 478 S30403 | SAE | USA | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
A 493 S30403 | SAE | USA | Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
A 580 S30403 | SAE | USA | Stainless Steel Wire |
A 632 S30403 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
A 666 S30403 | SAE | USA | Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
A 688 S30403 | SAE | USA | Welded Austenitic Stainless Steel Feedwater Heater Tubes |
A 778 S30403 | SAE | USA | Welded, Unannealed Austenitic Stainless Steel Tubular Products |
A 813 S30403 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
A 814 S30403 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
A 965 S30403 | SAE | USA | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
A 988 S30403 | SAE | USA | Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |