1.4910 Enquiry | Print this page
AFNOR 1.4910 Details
AFNOR 1.4910 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Stainless Steels | 1.4910 | France - AFNOR , NF EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels NF EN 10088-1 - Stainless steels - Part 1: List of stainless steels NF EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes NF EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels NF EN 10269 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties NF EN 10302 (2002) - Creep resisting steels, nickel and cobalt alloys |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.040 | ||
Si | - | 0.75 | ||
Mn | - | 2.00 | ||
P | - | 0.035 | ||
S | - | 0.015 | ||
Cr | 16.00 | 18.00 | ||
Ni | 12.00 | 14.00 | ||
Mo | 2.00 | 3.00 | ||
N | 0.10 | 0.18 | ||
B | 0.0015 | 0.0050 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
996 (≥) | 223 (≥) | 24 | 32 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 112 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
296 (≥) | 332 (≥) | 44 | 23 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
314 | 868 | 848 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
X3CrNiMoBN17-13-3 | AFNOR | France | Creep resisting steels, nickel and cobalt alloys |
1.4910 | AFNOR | France | Creep resisting steels, nickel and cobalt alloys |