XH51BMTЮ/KΦK-BД Enquiry | Print this page
GOST XH51BMTЮ/KΦK-BД Details
GOST XH51BMTЮ/KΦK-BД Standard Download
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | XH51BMTЮ/KΦK-BД | Russia - GOST , |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 0.035 | ||
| Mn | - | 0.03 | ||
| P | - | - | ||
| S | - | - | ||
| Cr | 9.00 | 12.00 | ||
| Ni | - | remaining | ||
| Mo | 5.00 | 7.00 | ||
| Al | 3.90 | 4.80 | ||
| Ti | 2.20 | 2.90 | ||
| Fe | - | 3.00 | ||
| Co | 14.00 | 15.50 | ||
| W | 5.00 | 6.50 | ||
| V | 0.20 | 0.80 | ||
| B | - | 0.002 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 922 (≥) | 175 (≥) | 31 | 31 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 411 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 776 (≥) | 676 (≥) | 13 | 24 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 868 | 574 | 634 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| XH51BMTЮ/KΦK-BД | GOST | Russia | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |
| XH51BMTЮKΦP(ЭП220) | GOST | Russia | Russia GOCT standard deformation of high temperature alloy grades and chemical composition |