X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 Enquiry | Print this page
EN X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 Details
EN X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 | Austenite | European - EN , EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10088-1 - Stainless steels - Part 1: List of stainless steels EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements EN 10272 - Stainless steel bars for pressure purposes EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.020 | ||
| Si | - | 0.50 | ||
| Mn | - | 1.00 | ||
| P | - | 0.030 | ||
| S | - | 0.010 | ||
| Cr | 19.00 | 21.00 | ||
| Mo | 6.00 | 7.00 | ||
| Ni | 24.00 | 26.00 | ||
| N | 0.15 | 0.25 | ||
| Cu | 0.50 | 1.50 |
Mechanical properties of grade X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 EN 10028-7
Yield Strength,Rp 0.2(MPa)
| Condition | Min | Max | Similar | Note |
|---|---|---|---|---|
| 300 |
Tensile Strength,Rm(MPa)
| Condition | Min | Max | Similar | Note |
|---|---|---|---|---|
| 650 | 850 |
Impact,Kv/Ku(J)
| Condition | Min | Max | Similar | Note |
|---|
Elongation,A(%)
| Condition | Min | Max | Similar | Note |
|---|---|---|---|---|
| 40 |
Reduction of area,(%)
| Condition | Min | Max | Similar | Note |
|---|
Hardness
| Condition | Type | Min | Max | Similar | Note |
|---|---|---|---|---|---|
| HB | 250 |
Physical properties of grade X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 EN 10028-7
| Modulus of elasticity, E | Note |
|---|---|
| 195 GPA | |
| Heat capacity, cp20℃ | Note |
| 450 J * kg-1 * K-1 | |
| Heat conductivity, λ | Note |
| 12 W * m-1 * K-1 |
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 is high alloyed stainless steel with an austenitic structure, which can be classified as nickel alloys (according to American standards).Delivered in the supersaturated state exhibits resistance to intercrystalline, pitting, and stress corrosion, salt, sea water, chloride, sulfuric acid, phosphoric acid and other aggressive chemicals in high concentrations in liquid and gaseous form.X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 steel is used mainly in the chemical, paper, cryogenic, aerospace, and power industries. The main end products are heat exchangers, chemical tanks, pumps, screws, aircraft components, bushings, shafts, water desalination and flue gas desulphurisation equipment, valves and even radiator components.
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| X1NiCrMoCuN25-20-7 | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 1.4529 | B.S. | UK | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| X1NiCrMoCuN25-20-7 | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 1.4529 | AFNOR | France | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| X1NiCrMoCuN25-20-7, 1.4529, Alloy 926, UNS N08926 | EN | European | Steel is used mainly in the chemical, paper, cryogenic, aerospace, and power industries. The main end products are heat exchangers, chemical tanks, pumps, screws, aircraft components, bushings, shafts, water desalination and flue gas desulphurisation equi |