A 314 S30900 Enquiry | Print this page
SAE A 314 S30900 Details
SAE A 314 S30900 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 314 S30900 | Austenite | USA - SAE , A 314 (2008) - Stainless Steel Billets and Bars for Forging |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.20 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.045 | ||
| S | - | 0.03 | ||
| Cr | 22.0 | 24.0 | ||
| Ni | 12.0 | 15.0 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 669 (≥) | 515 (≥) | 22 | 33 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 142 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 251 (≥) | 436 (≥) | 14 | 21 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 113 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 343 | 932 | 742 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 167 Type 309 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 249 TP309 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 276 309 | SAE | USA | Stainless Steel Bars and Shapes |
| A 312 TP309 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 314 309 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 403 WP 309 | SAE | USA | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| A 409 TP309 | SAE | USA | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| A 473 309 | SAE | USA | Stainless Steel Forgings |
| A 511 MT309 | SAE | USA | Seamless Stainless Steel Mechanical Tubing |
| A 554 MT 309 | SAE | USA | Welded Stainless Steel Mechanical Tubing |
| A 580 Type 309 | SAE | USA | Stainless Steel Wire |
| A 813 Grade TP 309 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
| A 814 Grade TP 309 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
| A 959 Type 309 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
| A 167 S30900 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
| A 276 S30900 | SAE | USA | Stainless Steel Bars and Shapes |
| A 314 S30900 | SAE | USA | Stainless Steel Billets and Bars for Forging |
| A 473 S30900 | SAE | USA | Stainless Steel Forgings |
| A 580 S30900 | SAE | USA | Stainless Steel Wire |
| S30900 | AISI | USA | Chromium Nickel Heat Resisting Steel |
Relevant products
A 314 S30900 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry |